Despite the efforts of companies that manufacture gantry cranes (fabricar grúas pórtico), there are always problems that will arise. Made of the best steel girders, and high-tech construction, they can often avoid many of these issues. However, there are many problems that will develop over time that you may not necessarily see after it first arrives. You must be cognizant of which companies are making the best ones, and choose one that is right for your business. Here are three of the most common problems associated with some of the best gantry cranes on the market.
Inability To Support The Weight Of The Load
Most of the gantry cranes that are produced can easily lift up to a certain amount of weight. For example, if you have purchased a 40 ton gantry crane (una grúa pórtico 40 toneladas), it should be able to lift and support that much weight without having any issues. However, if you have obtained one from a company that is not using the best available steel, you could run into buckling issues. It is also possible that the hoist, or the hydraulic component to the gantry crane, may begin to develop problems.
Not Easy To Install
When a gantry crane arrives, it is typically in multiple pieces, all of which have to be put together. This may require some type of welding, or you may have components that are kept together with nuts and bolts. One of the reasons they can be difficult to install is that some of them must be preconfigured. It might be too small, or too large, for the facility where you are placing them. If you do run into any problems, you need to know that the company you have purchased this from will help you work it out.
Hoist And Hydraulic System Problems
If you have ever used a gantry crane before, you know that some of the problems are associated with the hoist and the hydraulic system. The hoist is the mechanism by which the loads are lifted. The hydraulic system provides the power. Problems may occur with the hoist because it is not designed to be used with certain amounts of weight. The hydraulic system can go bad because of poor design, or it may not be engineered to lift the amount of weight it is advertised to do. That’s why it’s always a good idea to obtain a gantry crane that can lift far more than you will need.
Now that you have an idea about the three most common problems associated with gantry cranes, this will give you questions you can ask each manufacturer. You can quickly determine if it will have any problems at all, long before you place the order. All these gantry cranes are designed to lift sizable amounts of weight, yet many people often go beyond what they are capable of doing. These factors should help you navigate to the best and most reliable gantry crane that your company can use. Finally, your research will also help you find the most affordable units that will also have very few problems.